Wall panel Giesse


The aesthetic value of a wall is very often critical. Isomec brings together the beauty of an architectural wall installed with concealed fastening to the convenience of modular construction. Panel anchoring is carried out by means of a special joint. Giesse is available with diamond surface finish. The special concealed joint of this panel provides decidedly higher mechanical and insulation performance than any other product; the panel’s external diamond micro-scoring enhances its appearance.

  • Outstanding aesthetics increasing the building’s value
  • Concealed fastening joint.
  • Extreme ease of installation and quick completion
  • Lower fastening costs
  • Higher thermal seal compared to any other type of reinforced wall.


Self-supporting, polyurethane-insulated metal panel with concealed fastening system, designed for industrial and commercial building walls and partitioning in general which call for particular aesthetic features. It can be installed both horizontally and vertically.


The labyrinth layout and insulated joint, featuring a suitable screw housing, means the fastening is completely hidden from view and stops air passing through or heat channels. Each individual screw blocks both panel metal supports. Because of the particular joint shape, fastening is of the non through kind and it is applied on the pre-arranged area on the male edge of the external plate. Walls using these structures are erected by joining panels one to the other.

giesse1 (2)Insulating materials: foamed polyurethane

polyurethanehigh insulating power rigid expanded polyurethane (PUR), with the following quality standards:initial standard thermal conductivity: λ > 0.020 W/mK (UNI EN 12667); total density: 40 kg/m3 ±10% (UNI EN 1602); closed cell contents: 90-95% (ASTM 2856); compressive strength: >100kPa (UNI EN 1607); dimensional stability at –25°C/+80°C < 1% (UNI EN 826)

giesse2 (2)Metalic plate supports

Steel Zinc-coated, pre-painted rolled steel, thickness between 0.4 and 0.8 mm (UNI EN 10346).
Stainless Steel Rolled stainless steel, natural or satin finish, thickness between 0.4 and 0.8 mm (UNI EN 10088).
Alluminium Rolled aluminium alloy, natural finish, embossed and pre-painted, thickness between 0.6 and 0.8 mm (UNI EN 485).
Copper Rolled copper, thickness between 0.5 and 0.8 mm (UNI EN 1172).